Compaction is bought by pass count: the right roller reaches target density in fewer passes, and each saved pass is fuel and labour on every metre of the project.
1. Weight class by layer and project
| Roller | Weight | Drum | Best for |
|---|---|---|---|
| SEM 510 / 512 | 10 / 12 t | 2,130 mm, 306 kN | Trench backfill, road shoulders, small dams |
| SEM 514F | 14 t | 2,130 mm, high amplitude | Highway subgrade, airport earthworks |
| SEM 518 / 520 / 522 | 18 – 22 t | 2,130 mm, dual amplitude | Large earthworks, dams, deep lifts |
2. Amplitude and frequency vs layer thickness
High amplitude for thick subgrade lifts (30–50 cm); low amplitude for thinner finish layers. Dual amplitude on the 518/520/522 class lets one machine handle both ends of the job — usually the right choice when the same roller works subgrade and base course. The 510/512 pair runs 33 Hz with 306 kN vibration force, a proven setting for granular fill.
3. Smooth drum or pad-foot?
- Smooth drum — granular soils: sand, gravel, crushed stone. Seals and waterproofs the surface.
- Pad-foot — clayey soils: kneads and compacts cohesive material that a smooth drum only skims. Available as an option on the 518/520/522.
4. Gradeability and site logistics
For dam slopes and mountain roads, check gradeability — the SEM 510/512 holds 50%. Also confirm transport: a 22 t class roller ships on a flatbed within your country but needs RoRo/container-on-flat planning for import. We provide the shipping dimension sheet with every quotation.
Tell us your soil type and layer thickness — we will match the roller and quote CIF to your port.