The most common question we get from importers is not "what is the price" — it is "which size do I actually need". Buying a loader one class too small costs you in cycle time; one class too large costs you in fuel, freight and road permits. Here is how our customers in Africa, Latin America and Southeast Asia size it up.
1. Start with the material, not the machine
Bucket capacity is only useful relative to material density. A 5 t loader can fill a 3.0 m³ bucket with loose gravel, but the same bucket overloaded with wet clay or rock will exceed the rated load. As a rule of thumb:
| Material | Approx. density | Bucket choice |
|---|---|---|
| Coal, grain, wood chips | 0.8 – 1.0 t/m³ | Light-material bucket, size up |
| Sand, gravel, soil | 1.6 – 1.9 t/m³ | Standard bucket |
| Broken rock, slag | 2.0 – 2.4 t/m³ | Rock bucket with bolt-on teeth, size down |
2. Match the tonnage class to the job
- 1.8 t / 1.0 m³ — farms, municipal yards, light construction. See the 618D compact loader.
- 3 t / 1.8–2.5 m³ — tight urban yards, feed mills, warehouses with outdoor stock. See the 636D / 636F.
- 5 – 5.5 t / 2.6–5.0 m³ — the general-purpose sweet spot: aggregate yards, concrete plants, ports. See the 655D / 655F and 656D / 656F.
- 7 t / 4.2–6.5 m³ — quarries and slag with a 215 kN breakout force. See the 676D / 676F.
- 8 t / 4.5–7.5 m³ — high-output mines and loading stations. See the 688G with load-sensing hydraulics.
3. Engine emissions: check your destination before you order
Most of our export units ship with Tier 2 / Stage II engines (Weichai or SDEC power), which are accepted across Africa, the Middle East, Southeast Asia and most of Latin America. If your destination enforces Tier 4F / Stage IV — parts of Chile, Peru, or EU-linked projects — tell us before quotation; the engine selection and price change. Ordering the wrong emission stage is the single most expensive mistake first-time importers make.
4. Options that actually matter
- Pilot joystick control — standard on our F/G machines; reduces operator fatigue on long shifts.
- Quick coupler — lets one machine swap between bucket, log fork and grass fork. Cheap option, big utilisation gain for farms.
- Semi-automatic or air-conditioned cab — worth it above 40 °C ambient or in dusty quarries.
- Rear camera — strongly recommended when loading trucks in confined yards.
5. Shipping plan the machine into your budget
A 618D ships inside a 40HQ with room to spare; a 656 class machine typically ships as disassembled parts (cab, boom removed) in containers, or RoRo if your port supports it. Ask us for the container loading plan before you compare prices — freight can move a "cheap" quote above a properly packed one.
Ready to size your machine? Send us the material, the loading height and your discharge port — we reply with a recommendation and a CIF quote within 24 hours.